The number of pages within the document is: 107
The self-declared author(s) is/are:
STMICROELECTRONICS
The subject is as follows:
Original authors did not specify.
The original URL is: LINK
The access date was:
2019-02-14 13:41:33.754687
Please be aware that this may be under copyright restrictions. Please send an email to admin@pharmacoengineering.com for any AI-generated issues.
Loading...
Reload document 
Open in new tab The content is as follows:
March 2012Doc ID 18153 Rev 31/107 UM1021User manual STM32F105xx, STM32F107xx, STM32F2xx and STM32F4xx USB On-The-Go host and device library Introduction The USB On-The-Go Host and Device Library is a firmware and application software package for USB (universal serial bus) hosts and devices. This package includes example and demonstration software for developing applications using USB full speed and high speed transfer types (control, interrupt, bulk and isochronous). The aim of the USB OTG Host and Device Library is to provide at least one firmware example demonstration for each USB transfer type. This library is designed for use with the following evaluation boards: STM3210C-EVAL evaluation board (UM0600) for STM32F105/7 devices STM3220G-EVAL evaluation board (UM1057) for STM32F20x devices STM3221G-EVAL evaluation board (UM1065) for STM32F21x devices STM3240G-EVAL evaluation board (UM1461) for STM32F40x devices STM3241G-EVAL evaluation board (UM1460) for STM32F41x devices This document describes all the components of a USB OTG host and device library, including examples for the following types of devices: Mass storage, based on the microSD ca rd available on the evaluation boards HID joystick, based on the embedded joystick on the evaluation boards Virtual COM port Direct Firmware Update-based Audio (OUT) Dual Core, based on mass storage an d HID examples (available only for STM322xG-EVAL and STM324xG-EVAL evaluation boards) And the following examples for hosts: Mass storage, using file expl orer, write files and slide show HID, dynamic support for mice and keyboards Dual core, for mass storage on the high speed port and HID (keyboards or mice) on the full speed port The package also includes an example of a manual dual role device that enables the core to switch between host and device modes depending on user input. www.st.com
Please note all content on this page was automatically generated via our AI-based algorithm (PqSMThqbbNgcdlvyNjQx). Please let us know if you find any errors.